Gas Mobility Control


Impact of Surfactant Structure and Oil Saturation on the Behavior of Dense CO2 Foams in Porous Media

Max Chabert (Solvay) | Lahcen Nabzar (IFPEN) | Virginie Beunat (IFPEN) | Emie Lacombe (Solvay) | Amandine Cuenca (Solvay)



Miscibility with oil lies among the main advantages of dense CO2 injection for pore scale oil displacement during tertiary recovery. At reservoir scale, injecting dense CO2 in the form of foam can also improve its sweep efficiency. However, although the use of such miscible dense CO2 foams has been considered in over twenty pilots since the 1980’s, only few lab studies have considered foams formed with CO2 in this particular thermodynamical state. Indeed, dense CO2 has solvation properties and a viscosity higher than that of a gas. Although the generic term of foam is used, dense CO2 actually has liquid-like properties, and dense CO2 foams should be coined emulsions. This impacts several attributes of these dispersions in porous media, such as Mobility Reduction Factors (MRF) and behavior in presence of oil.


We present new results demonstrating that classical foamers are not effective in improving mobility control of dense CO2 in porous media. However, relatively high MRF can be achieved using carefully formulated surfactants. Based on these findings, we study the impact of foam on miscible flooding efficiency in coreflood experiments. Reversely, we also evaluate how miscibility of CO2 with oil impacts foam MRF. Our approach is based on multiple corefloods experiments, with different formulations, at various oil saturations. Additionally, physical-chemistry measurements such as interfacial tension estimations and foam stability monitoring are performed in reservoir conditions (pressure and temperature). This set of experiments shows that besides ability to reduce dense CO2 mobility in porous media, a balance must be found between maximizing MRF and minimizing the risk of emulsion formation in porous media.


This paper brings new insights on the interpretation of CO2 foams coreflood results, based on the thermodynamical properties (solvation power, density, viscosity) of the CO2 phase. In particular, it provides the reader with a clearer view of gas properties that must be considered when analyzing results of dense CO2 foams corefloods. This can help reconcile seemingly contradictory results appearing in the literature, particularly regarding the values of MRF obtained with CO2 foams as a function of pressure and in the presence of oil.

View Full Document

Question? Comments?

Download our brochure!

Copyright 2023 The EOR Alliance | All Rights Reserved.